Click on any image for the full size photo
PT Anniversary
- black ash plinth
- mains power suppy, all electrolytic capacitors replaced
- PT clamp and dished platter, original SME armboard included
- Lid in excellent condition - very little glue crazing in joints
Tonearm shown is a Helius Orion Mk.1 with an AT32EII cartridge
PT mini-anni #3
- matt black finish (fine grain wood; mahogany?)
- white acrylic top plate and armboard
- Funk Firm Vector drive fitted
- External Speed controller, all electrolytic capacitors replaced, with Nuvotem toroidal transformer regulated PSU
- Switchable LED illumination of platter and badge
- Four oak feet, three adjustable for levelling. Spirit level in plinth
Tonearm shown is a Helius Orion Mk.3 with an Ortofon MC20 Super cartridge.
Note Clamp shown in photos is not included; it is borrowed from the Anniversary
Plinth finish options
- [Left] Light wood; cherry?
- Rosewood - this is my original PT from 1985, a bit faded on the right
- matt black plinth; may be the same wood as the top, not the ash usually used
- [Centre] Another rosewood - this was unused and has not faded. Glue patch on right will be covered by a badge
- [Right] Speed controller and PSU in separate case
